3D printed digital parts used. The main ship is from 2nd Dynasty the wings are from some space shuttle model file I found. The rear thrusters are from Batman batwing concept plane. The cargo entrance is from a star citizen ship model I digital modified. The interior I covered in metal sheets and printed stickers to go over top. The floor is magnetic and so are the seats. The headlights are from two mini flash lights I got from the grocery store. The internal lights are led light strips I bought from ebay. The mini which I bought a mini motor from amazon and found a 3d file for the casing around it. The ramp supports are retractable id badge reels. Everything else is 3d designed, printed and painted. I put magnets in the top panels to secure them. The middle top panel has a top hatch that lifts up and slides back. In side is a elevator that can telescopes down to the floor and a safety railing slides up from the elevator platform. all the internal doors are on tracks, separate in the middle and slide open. I used thick plexiglass to make the windows. For the windshield I 3d printed and constructed a buck and a diy vacuum forming setup to for the windshield shape. This was my first time vacuum forming something. It was really cool and surprisingly simple once I figured it out. Make sure your part is really smooth if your making something clear.