Hi All,

Five nights at Freddy's - Withered Bonnie.

Recipe.

Bonnie - is from Funko and removed the left foot and right hand and made the endoskeleton foot/hand using plastic card, tube and rod. The lower jaw had the excess plastic and teeth removed and then it was puttied up and smoothed out and new teeth were added using plastic card.

The left arm was removed and the head I cut off the jaw and then cut off the front section of the face. The inside of the head has been filled with plastic tile sheet and the eyes are plastic rod.

The damaged area's were done using a soldering iron and model knife and the button's are 1:6 scale buttons. The wiring was done using old electrical cable and using the thinner wires inside. He was painted and weathered using Vallejo paints and pastel chalks.

Base - is foam board and the tiled floor, checked strip, pizza's and small note/sign were printed off the net and glued into place. The wall was painted with Vallejo's medium grey and then I used Vallejo's Chocolate Brown and watered it down and dapped it over the wall and floor to give it a worn and dirty look.

I decided to add the front section of Bonnie's face to the dio as my son asked could it be on the dio.